Helical Gears Manufacturers

Helical gears work in a more refined way than spur gears. The lead edges of the teeth of these gears are not parallel to its axis of rotation. Instead, they are curved and work at an angle. Because of this setup, the gears are shaped like a helix, hence its name. And due to the fact that the gears are gradually engaged as the wheels turn, the device tends to run smoother and quieter compared to the operation of a regular spur gear. We at Ashoka Gears, we assure that our helical gears are the best you can find compared to all other helical gears manufacturers in the country.

Helical gears can be configured either crossed or parallel, depending upon the application’s requirements. Mechanically speaking, parallel helical gears are better. This is because the helices meet at a tangent. In the crossed version, they don’t do so and the contact point is limited to the surfaces of the tooth. As such, the crossed helical gear configuration is not advised for use in applications that deal with heavy loads. This is why there are just a handful of helical gears manufacturers focusing in the production of the crossed version type.

Double helical gears, on the other hand, are also termed as the herringbone gears. Here, two gears of the same type are stacked together. Most double helical gears come in cylindrical form. It has two sections of teeth which are simply referred to as the left hand and the right hand. At Ashoka Gears, we provide you with great gear options that other helical gears manufacturers may not be able to give.

Helical gears are collectively referred to as industrial gears. The slanting teeth of these gears aid in gear meshing. The most common application of helical gears would in a car’s transmission system.

Most engineering and manufacturing processes prefer the use of helical gears over spur gears because the former works much faster and is a lot stronger. The usual materials used in manufacturing this type of gears are regular steel, stainless steel, hardened steel, bronze, and high-grade aluminum.

Helical gears can be custom-made as per the user’s specific requirements. Regular helical gears can be made with a manufacturing capacity of 10 mm to 8,500 mm outside diameter, and may contain up to 40 modules.

Double helical gears, on the other hand, may be created with or without gap. Like the single helical gear, it may have 40 modules as well. Its manufacturing capacity can be anywhere from 10 mm to 6,500 mm outside diameter.

All these you can avail of only at Ashoka Gears, one of the best helical gears manufacturers in the area. For all your gear needs, rely only to the experts. We assure precision and quality in every single one of our products.